How flashing Lenovo A390 with PC

There are many reasons why android smartphone need diflashing. Maybe you want to overcome that bootloop or update software into a new or let the phone is often an error due to virus and so on. Well, this time the admin will provide easy tips on how to flash the Lenovo A390 smartphone with computer alias PC.

How flashing Lenovo A390 with PC Computers

Before performing the flashing Lenovo A390, first download and install the following tools below:
Lenovo A390 firmware download HERE.
Download USB drivers HERE.
Download SP Flashtool HERE.

The above applications can be downloaded for free. After you download all the tools above, the new follow these tips:

1. Extract the files on it first, make sure everything is complete yes including its USB Driver. For Driver exe should be readings to be successful as well.
2. Locate and open the folder Stock ROMnya, after it included a file called 'checksum.ini.', The file is deleted yes please.
3. Turn off your smart phone, do not forget to wait for about 6 seconds before connecting the smartphone to a PC to make sure that Lenovo really dead.
4. If it really felt the phone off, connect the USB cable Hp you wear suitable.
5. Make sure the driver is installed correctly, and then the new phone should be deprived of the PC.
6. Move to folder SP flashtool you already downloaded and extracted earlier. Look for a file named Flash_tool.exe, then right click select run administrator or run as administrator.
7. After Flashtool run successfully, find and choose the button scatter loading. And find the file named 'MT6577_Android_scatter_xxxx'. This file is in the firmware folder your laptop or PC computer, stay searched yes.
8. After it was quite dichecklist or unchecked files that need, to start the process of flashing the click of a button flashtool donwloadnya.
9. Smart phones you connect it to a PC, if the driver had been installed perfectly then Lenovo will immediately connect to the computer. Ensure that your smartphone battery dies and installed. Remember batteries also do not empty or lowbat yes. Minimal battery power about 50%, so do not forget to discharge before starting this step flashing.
10. The flashing process will run when the smartphone is connected to a computer, just wait. Later when the process is complete will appear green box and there centangnya alias download OK which means flashing has been successful.
11. The final step is, remove the USB cable from your phone. After that unscrew the back of the smartphone, remove the battery. Wait a minute, then plug the battery again and turn it on.
12. The phone is in normal condition and the flashing process with SP Flashtool been successful.

Those are some tips on how to flash Lenovo A390 that you can try. As a side note, after the flashing process is finished do not quickly Hp immediately shuts down. Therefore, when the battery is removed just wait around for approximately 10 minutes and at Here again, if necessary even Hp please first until fully recharged only after it is turned on.

When you turn on the phone, it may be a bit old could be around 2-5 minutes, but it's okay just wait patiently enough. Okay, much had admin give the tips, may be useful.